Stone Care – Turkish Marble Depot

The Importance of Cleaning
The daily removal of ordinary dirt and soil is an important phase in the maintenance of marble. Sweeping compounds containing oil must never be used on marble because they will eventually discolor the surface. If floor is heavily trafficked it should be cleaned daily and rinsed with clean water until all traces of dirt solution are removed. Marble should then be allowed to dry.

Marble Maintenance Procedures
The care and cleaning of marble products is quite simple, if the proper procedures are followed, products will maintain their natural beauty and durability for a lifetime. To ensure the best service from marble products, clean the product thoroughly after installation, and follow up a regular maintenance program.

Immediately after completing installation, wash the floor clean of loose debris, dirt and foreign material. Use clean, soft cloths, sponges or mops and fresh warm water. Allow to dry. A second rinse application may be required to remove any additional film. Apply a thin, even coat of sealer and allow to dry for 3-5 minutes, removing excess sealer before it dries. If too much of material is applied, it may be removed by re-applying sealer to re-activate residue, buffing it off before it dries. Finished area can be used for normal foot traffic in 3-5 hours, but must be kept dry and free of staining agents for 72 hours.

It is strongly recommended that the above-mentioned procedures be completed immediately after installation and repeated in a regular maintenance program.

Suggestions for the Maintenance of Marble
The physical characteristics of marble govern the methods of maintenance and the products chosen to treat and maintain it properly. Marble is a natural product of crystallized rock composed of calcium carbonate. Generally, marble used in the interior of buildings for decorative purposes has either a polished finish (glossy surface reflecting light) or a honed one (dull and smooth surface giving relatively little reflection of light). Each of these types of marble finishes should be treated in the same manner.

Why Does Marble Need Maintenance?
Because marble is naturally porous, it is necessary to use a penetrating (not surface) sealer. Such penetrating products fill the pits and voids and actually become an integral part of the floor itself. The primary purpose of sealing is to provide protection to the marble itself. Ordinary dirt and soil are sealed out of the floor as if all pits and voids have been filled and sealed. They are held on the surface where they can easily be removed. Marble floors properly sealed and finished are easy to clean and maintain. Marble floor should not be sealed until the surface is thoroughly cleaned and dried.

Why Marble Should Be Kept Clean?
The secret to beautiful marble is merely keeping it clean agents original treatment with sealer. Complicated cleaning agents and maintenance procedures will never be needed if the marble surfaces are regularly cleaned. If marble deteriorates it is simply because it’s cleaning has been neglected or harsh damaging cleaners have been used. When marble is neglected dirt and grease are allowed to accumulate, therefore the surface can be damaged almost beyond repair and cracks can be caused by general deterioration. Improper cleaning materials such as those containing alkali, acid metallic salts or other strong ingredients actually attack the marble itself and increase and enlarge dirt catching pores. Soap or abrasive type cleaners should never be used on marble surfaces. This type of cleaner reacts with the calcium carbonate /the marble itself to build a soapy scum which destroys the beauty of the marble and forms a greasy or slippery film that will catch or hold dirt.

The use of an abrasive cleaner will result in unsightly scratches on the surface. Abrasive cleaners are almost impossible to remove by rinsing and normal foot traffic will grind the left over abrasive particles into the surface, thus running the floor. The ideal cleaner should be first of all, effective in removing soil. Secondly, it should not develop any damaging discoloration or surface film. It should be rinsed free even in hard water.

Special Notes
Professional cleaners: a skilled, knowledgeable in-house maintenance staff should be able to maintain the products successfully. For consistency and proper tools it may be advisable to hire a marble contractor or a professional cleaning contractor. Maintenance people must be aware of previously used waxes and of residuary materials on the surfaces. Proper removal and cleaning must be accomplished prior to applying any maintenance products.

How do I maintain the beauty of my natural stone?
At Turkish Marble Depot, we take great pride in the careful maintenance and selection of our products. The following steps are helpful in maintaining the luster and vibrancy of your products:

Turkish Marble Depot carries a full line of Natural Stone Care Products for your needs.
For regular maintenance and cleaning, we recommend soap and water and/or specific natural stone care products. Do not use any harsh chemicals or abrasives.
For yearly maintenance, we recommend sealing your stone to insure the highest level of protection from stains and scratches.
As we all know, accidents happen. If something unfortunate does occur, please feel free to give any of our Sales Representatives a call. Our knowledgeable staff is happy to assist you.

For additional information please visit: Miracle Sealents

Disclaimer: The information provided at this page is property of TurkishMarbleDepot.com and cannot be copied without a written authorization from TurkishMarbleDepot.com. TurkishMarbleDepot.com is not responsible for any damages, losses or injuries that may be caused by the information provided here. It is the customers responsibility to make sure that proper installation, care, and guidelines are used before using any of products.